manualshive.com logo in svg

Bayer HealthCare Rapidlab 800, Руководство оператора

Поделиться
Скачать
Bayer HealthCare Rapidlab 800 Скачать руководство пользователя страница 173

     

    

Use this procedure to view pending maintenance tasks and record completed
maintenance tasks in the maintenance log.

1.

Access the Maintenance Schedule screen from the Menu screen:

a. Press 

2 Maintenance

 and press 

Enter

.

b. Press 

4 View Schedule

 and press 

Enter

.

The Maintenance Schedule screen appears as shown in Figure 3-1.

Tasks due for the current date appear at the top of the scroll list.

" !    

          

        

2.

Use the arrow keys to highlight the task you want to record as completed.

3.

Press 

Task Done

.

The Maintenance Task Done dialog box appears.

4.

Enter your operator ID and press 

OK

.

The Maintenance Schedule screen reappears with the updated task list.

5.

Select another task to record or press 

Done

 to return to the Menu screen.

Record maintenance tasks on the day you complete them. If you perform a task on
Monday but record it on Tuesday, the system will list the task as being completed
on Tuesday, not Monday.

2

Menu Code

4

 

Содержание Rapidlab 800




























































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды