Bayer HealthCare MEDRAD MRXperion, Руководство по эксплуатации, Страница: 70 / 126

12 - 60 MEDRAD® MRXperion
Figure 12 - 2: Arming Prevented Communication
2.
After examining the fluid path to determine it is free from excess air, perform the I Checked for Air Confirmation:
Figure 12 - 3: I Checked for Air Confirmation
a.
Select Yes to acknowledge that the operator has examined the syringes and connector tubing and has
determined that all air has been expelled.
NOTE:
When the operator selects Yes , the I Checked for Air icon illuminates on the display and the I Checked for
Air Confirmation button illuminates on the injector head.
b.
Select No if the operator has not checked that all air has been expelled from the syringe and tubing or if air is
observed while checking. The system does not arm.
NOTE:
The system monitors the syringe presence and piston movement after the I Checked for Air has been
confirmed. If the syringe is removed or the piston is reversed, the system resets the I Checked for Air
confirmation.
3.
If the operator did not correct the Add Volume Indicator prior to arming, the Insufficient Volume message is
displayed.
Figure 12 - 4: Insufficient Volume Message
The system generates a modified protocol based on the available Volume Remaining.
a.
Select Yes to accept the system-modified protocol. The system continues with the arming process. Go to
"Section 12.3 - Initiating an Injection" .
b.
Select No to reject the system-modified protocol. The system does not arm.
The system remains armed until one of the following conditions are met,