Bayer HealthCare MEDRAD MRXperion, Руководство по эксплуатации, Страница: 16 / 126

2 - 6 MEDRAD® MRXperion
2.5 MR Icons and Classifications
2.6 Warning Labels and Symbols
Identifies an input terminal. (IEC TR 60878, 5034)
Identifies an output terminal. (IEC TR 60878, 5034)
Identifies service assistance. (IEC TR 60878, 0717)
MR Conditional
Has been demonstrated to pose no known hazards in a specified MR environment
with specified conditions of use as defined by the ASTM International Standards for
MRI Device Marking. (IEC 62570, 7.3.2)
MR Unsafe
Known threat or poses a hazard in all MR environments as defined by the ASTM
International Standards for MRI Device Marking. (IEC 62570, 7.3.3)
Pushing prohibited in this area. Do not push the injector above this label.
(ISO 7010, P017)
Do not coil the cable to the Power Supply on or near the injector or magnet. Excess
cable should be tie wrapped in a figure-eight configuration and positioned as far
away from the magnet as possible. Looped or coiled cable could create image
artifacts.
Caster brakes must be used to prevent the injection system from drifting during use.
The injector (scan room unit) power supply must be more than 6ft (1.8m) away from
the magnet.
The optional Penetration Panel Filter must be more than 6ft (1.8m) away from the
magnet.
MR