Bayer HealthCare MEDRAD MRXperion Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 126

Bayer HealthCare MEDRAD MRXperion Скачать руководство пользователя страница 3

Operation Manual

The MEDRAD® MRXperion MR Injection System has an expected service life* of 7 years from the date of product installation
when operated according to the instructions provided with this device. These 7 years include suggested or mandatory
actions of preventative maintenance and repair activities, as well as required calibration(s) that are needed. Required
reading includes the instructions for use and other materials provided with the device. This also includes any hardware and
software updates that may be required.

* Expected Service Life: The length of time that an individual unit, lot, or batch of devices is expected to remain functional
after it is placed into use.

Report any serious incident that has occurred in relation to this device to Bayer (radiology.bayer.com/contact) and to your
local European competent authority (or, where applicable, to the appropriate regulatory authority of the country in which
the incident has occurred).

A glossary of the symbols used on the MEDRAD® MRXperion MR Injection System can be found in Chapter 2 of this manual.

«
1
2
3
4
5
...
»

Содержание MEDRAD MRXperion































































































































Отзывы:

Нет отзывов