Bayer HealthCare MEDRAD MRXperion, Руководство по эксплуатации, Страница: 44 / 126

7 - 34 MEDRAD® MRXperion
7.2 Injector Status Lights
The injector head has two injector status lights that illuminate continuously or blink, depending on the conditions listed
below. Syringe A illuminates
green and Syringe B illuminates blue .
Volume Display
Q
Displays “--” when no syringe is installed
Q
Displays “--” when syringe is engaged, plunger not docked
Q
Displays actual volume when I Checked for Air confirmed, syringe engaged,
plunger docked
Q
For key presses that the system is programmed to ignore, displays “--” and
illuminates the Attention Indicator
A Button
Q
Illuminates continuously when pressed
B Button
Q
Illuminates continuously when pressed
KVO Button
Q
Blinks to prompt the operator when KVO can be started
Q
Illuminates continuously when KVO is enabled
Test Inject Button
Q
Blinks slow to prompt the operator when a test injection can be performed
Q
Blinks fast during Test Injection
I Checked for Air
Confirmation Button
Q
Blinks slow after priming to alert the operator to I Checked for Air
Q
Illuminates continuously when pressed, indicating that I Checked for Air is
completed
Table 7 - 1: Injector Status Light Functionality
Condition Injector Status Light Description
Armed The lights corresponding to the syringes to be used for the protocol blink.
Injecting The light corresponding to the syringe that is moving remains illuminated.
Pause or Hold The lights corresponding to the syringes to be used for the protocol blink.
KVO The Syringe B light is illuminated during KVO.
Name Button / Icon Behavior / Event
mL
mL
A
!
B