Bayer HealthCare MEDRAD MRXperion, Руководство по эксплуатации, Страница: 43 / 126

Operation Manual 7 - 33
7 System Lights and Indicators
Q
"Injector Head Lights and Indicators"
Q
"Injector Status Lights"
Q
"Workstation Power Indicators"
Q
"Handswitch Light"
7.1 Injector Head Lights and Indicators
The buttons on the injector head illuminate or blink depending on the conditions listed below:
Name Button / Icon Behavior / Event
+/- Buttons
Q
Continuously illuminates white when A button is pressed
Q
Continuously illuminates white when B button is pressed.
Q
Blinks to indicate that the syringe volume should be increased or
decreased
Enable Piston Control
Button
Q
Illuminates continuously when manual piston moving is enabled. Auto-
matically disables after ten seconds of inactivity.
Forward and Reverse
Piston Controls (Side A
or B)
Q
Illuminates when enabled
Arm Button
Q
Blinks to prompt the operator when the injector is ready to Arm (I Checked
for Air has been confirmed, protocol is locked from the display, injector
head is tilted down)
Q
Illuminates continuously when pressed, indicating that system is Armed
Attention Indicator
Q
Blinks fast to alert operator of error: head is tilted up after Test Inject, KVO,
or Arm button is pressed
Q
Continuously illuminates amber during Full System Shutdown or Injector
Shutdown
Q
Continuously illuminates amber when communication is lost between dis-
play and pod (only applicable to Workstation with Pod)
Q
Blinks amber when communication is lost between injector and worksta-
tion
Q
Illuminates Red to alert operator of a critical error.
Prime Button
Q
Blinks slow to prompt the operator when to prime with the injector head
tilted up
Q
Automatically stops blinking and is no longer illuminated after 30 seconds
of inactivity or after the piston is manually moved
Q
Blinks fast during priming