Bayer HealthCare BR4224, Инструкция по эксплуатации

Страница: 8 / 44

8 EN
USING THE ATTACHMENTS
Floor/carpet brush (1)
When using the brush (1) set the switch (2) to the
necessary «FLOOR/CARPET» position.
Crevice nozzle (24)
The nozzle (24) is used for cleaning radiators, chinks or
spaces between cushions.
Furniture/furniture upholstery brush (25)
Use the attachment (25) to clean the furniture upholstery.
ASSEMBLING THE VACUUM CLEANER
Attaching and removing the flexible hose (7)
• Insert the flexible hose (7) ending (8) into the air inlet
(10) until the locks (9) catch.
• To remove the flexible hose (7), press the locks (9) and
detach the ending (8) from the air inlet (10).
Attaching the telescopic pipe (4) and the attachments
• Attach the telescopic extension pipe (4) to the flexible
hose handle (5).
• Extend the lower part of the telescopic extension pipe
(4) to the required length, having preliminarily pressed
the lock (3) (pic. 2).
• Choose the necessary attachment – floor/carpet brush
(1), crevice nozzle (24) or upholstery attachment (25) –
and attach it to the telescopic extension pipe (4).
• You can attach the attachments (24 and 25) to the
flexible hose handle.
ATTENTION!
• Do not use the vacuum cleaner in places where
aerosols are used or sprayed and in proximity to highly
inflammable liquids, do not use the vacuum cleaner in
the places where such liquids are stored.
• The vacuum cleaner is not intended for collecting water
or any other liquids; do not use it for collecting burning
or smoking cigarettes or cinders.
• Do not use the vacuum cleaner for collecting dust of
plaster, concrete, flour or ashes.
• Take sharp objects away from the floor before cleaning
to prevent damage to the unit.
• If the suction power of the vacuum cleaner decreases
rapidly while cleaning, switch it off immediately, unplug
it and check the telescopic pipe (4) or the flexible hose
(7) for obstruction. Remove the obstruction, after that
you can resume cleaning.
USING THE VACUUM CLEANER
Attention!
Switch the vacuum cleaner on only with the dustbag (15 or
disposable paper dustbag 26) and the inlet (16) and outlet
HEPA (21) filters installed.
• Before cleaning always make sure that the filters (16,
21) are installed properly.