Bay Tek Games Jewel Mine Скачать руководство пользователя страница 45

Страница: 45 / 55

TROUBLE SHOOTING GUIDE

Problem Probable Cause Remedy

Marquee
Jackpot
Display not
working

Refer to wiring diagram -

”Marquee & 12 V Wiring”

5 Volt DC power In

is missing.

Communication cable issue.
Pinched, broken, or

disconnected wiring

Faulty board.

Jackpot display receives signals and 5 Volt DC power in from

Display Driver Board.

Display Driver board provides power to, and receives signals

from Rasp Pi Marquee Board.

Check cables from power supply to displays. (AACE9608)

Check ribbon cables from display driver to display. (AACE9620)

Check ribbon cables from display driver to Ras Pi Board

(A5CBL-RBN40-1)

Check power cable from Driver Board to display. (AACE9609)

It could be any of the 2 circuit boards in the system:

Display Board (A5LD1052)

Display Driver Board (AACB9603)

Rasp Pi Marquee Board (AAMBRPI-JM-M)

Meters do not work

Game counter clicks at start
of each game.

Ticket counter clicks as tick-
ets come out of game.

The 2 crimped wires may

be faulty

Pinched, broken, or

disconnected wiring

I/O Aux Board faulty.

Inspect crimps on AACO1020 to ensure good
connection.

Check connections from counters to main board.

Check continuity on wires.(AACO1020, AACE9602)

Replace I/O Aux Board. (AACB9601)

Menu Buttons
do not work.

Swap connectors at the 2 buttons

Pinched, broken, or

disconnected wiring

I/O Aux Board faulty.

Replace button if problem stays with button.(AAPB2700)

Inspect crimp to ensure good connection. Check
connections from menu buttons to main board.
Check continuity on AAPB2700, AACE9602

Replace I/O Aux Board. (AACB9601)

Marquee
Jackpot not
incrementing.

Jackpot will
increment
when the
game is over.

Communication network

cable issue.

Ensure the Network cable is connected from front Rasp Pi board

to the marquee Rasp Pi Board. (A5CORD96)

Enter the “Payout Settings” menu and ensure the Minimum val-
ue and Maximum value is set correctly.

If the game is at the maximum value, it will not increment higher.

Содержание Jewel Mine
























































Результаты поиска

Содержание Jewel Mine

Отзывы:

Похожие инструкции для Jewel Mine

Бренды по названию

Популярные бренды

Bay Tek Games Jewel Mine, Руководство по обслуживанию

Результаты поиска

Содержание Jewel Mine

Отзывы:

Похожие инструкции для Jewel Mine

Бренды по названию

Популярные бренды