Bay Tek Games Jewel Mine, Руководство по обслуживанию

Страница: 29 / 55

29
HOW TO: REMOVE WHEEL ASSEMBLY CONT.
To Replace Solenoid:
Place the wheel on it’s side with the solenoid assembly and bar toward top of
the assembly.
Remove 4 Phillips screws in the center of wheel.
Remove protecting brackets along the side by removing # 2 square screws
Remove the 2 square head screws in the bottom of wood.
Remove the top wood section and solenoid assembly can be
removed from shaft.
Turn the wheel so that the open panel is in the rear of the
cabinet.
Reach through this opening to grab the center shaft and tilt
the top of the wheel out toward the back of the cabinet,
2 people may be needed for this step.
Push in at the bottom of the wood assembly to help the
wheel to pivot.
Place wheel assembly on floor behind game