Bay Tek Games Jewel Mine, Руководство по обслуживанию

Страница: 46 / 55

46
WHEEL NOT SCORING PROPERLY
2.) Reading 2 sensors that are watching the wheel spin.
How to diagnose:
1.) Ticket pattern selected in the menu.
Enter “Payout Settings” menu and verify Ticket Pattern set.
Default pattern is # 6
It will show you the numbers that are on the wheel.
If your numbers are different, then change ticket pa
ttern selection to the one that matches your wheel.
The game determines the score by:
1.) Ticket pattern selected in the menu.
2.) Reading 2 sensors that are watching the wheel spin.
AACB8852-JM
Arrow Encoder
Sensor
AACB4403
Home Sensor
AACE9610
To AACB9601
I/O Aux Board
Encoder Sensor:
This sensor reads the
notches in the side
of the wheel.
It is located behind
the “Ticket Arrow”
Home Sensor:
This sensor watches a silver tab that is
mounted to the side of the wheel.
The tab is reflective and should be 1/2 inch
away from the sensor
.
Between Green and Orange wires = 12 Volts
DC input voltage all the time.
Between White and Green wires =3.3 volts
normally Drops to 0 volts when in front of silver
tab. Make sure it drops all the way to zero.
This Encoder Sensor (AACB8852-JM) will show results
in the diagnostic menu.
The “Front Encoder” value will go from 0 to 20 as you
turn the wheel downward.
If it does not go to 0 after 20, then the Home Sensor
AACB4403) is dirty or faulty.
Note: Make sure the side plexi is not bending
up and interfering with the sensor.