Bay Tek Games Jewel Mine, Руководство по обслуживанию

Страница: 30 / 55

30
HOW TO: REMOVE WHEEL ASSEMBLY CONT.
Re– install AC cable into cable clamps and power strip.
Plug Solenoid Cable back together.
Plug Home Sensor cable carefully into sensor. It will help to rotate wheel
so the opening is next to sensor to make more room for your hand.
To re-install wheel:
When ready to install wheel assembly back into the game, move wheel assembly to the
back of the cabinet, and position the arm so that it will turn the wheel in the correct
direction:
Position bar on the top of the solenoid assy.
Position the wheel so that the opening is toward the
rear of assembly.
With 2 people - grab the center rod through the
opening and lift assembly.
Place the bottom wood assembly into cabinet first.
Then rock wheel carefully forward and place in
position so that the bolt holes in cabinet line up
with the assembly.
Go to front of cabinet and re-connect long wheel link to pivot
mechanism. Re-insert cotter pin.
Re-install clear safety plexi.
Reconnect ticket tray molex connector.