Bay Networks 6300, Инструкция к добавке

Страница: 487 / 593

C-31
Chapter 2 Configuration Parameters
Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX
Book C
Setting Parameters to Supplied Defaults
Each configuration parameter, except the RA 6300’s IP address, has a
default value. Using the na command set, you can return any parameter
to its default setting (for more details, see set on page C-20). Depending
on the parameter type, the syntax options are:
Setting Annex
Parameters 1. set annex annex_parameter 0
The set annex
annex_parameter
0 command sets parameters that
require a numeric value. For example, to set pref _ dump _ addr to its
default, 0.0.0.0, enter:
command: set annex pref_dump_addr 0
2. set annex annex_parameter
""
The set annex annex_parameter "" command sets all parameters
that require a string value; these parameters default to either a null
string ("") or “<unset>”. For example, to set image
_ name to its
default, a null string (""), enter:
command: set annex image_name ""
3. set annex
annex_parameter
default
The set annex annex_parameter default command sets all other
parameters. These parameters are set by choosing either an option
from a known list or a yes/no response. For example, to set
enable_security to its default, N, enter:
command: set annex enable_security default
Setting interface
Parameters To set an interface parameter to its default value, use the set interface
command:
1. set interface interface_parameter ^@
2. set interface interface_parameter " "
3. set interface interface_parameter default