manualshive.com logo in svg

Bay Networks 6300, Инструкция к добавке

Поделиться
Скачать
Bay Networks 6300 Скачать руководство пользователя страница 44

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Chapter 1    Introduction to the Remote Annex 6300

A-16

Book A

•

Global port parameters that apply to all ISDN calls. You can
also set these parameters for a subset of calls. To define port
parameters globally, you use na or admin. To define the same
parameters for a subset of calls, you enter the parameters in a
Session Parameter Block (SPB) that handles the calls. SPBs are
located in the Annex configuration file. For detailed information,
see Configuring the PRI Interface, Global Ports, and Sessions
on page A-51.

•

PRI parameters, which define characteristics of the PRI line
and establish remote IP and IPX addresses.

•

Interface parameters.

•

Modem parameters that apply to the internal modem set.

Loading Files

RA 6300 files can be loaded from a host using either the trivial file transfer
protocol (tftp) or the expedited remote procedure call daemon (erpcd).

•

The erpcd utility runs on a UNIX host; it listens for RA 6300
file server host requests (to download the operational code and
other files).

•

The tftp program, supplied on most hosts, is supported as an
alternative to erpcd and as a back-up in case a UNIX host is not
available to install erpcd.

If a software problem occurs, the RA 6300 can send a memory dump to
a host. These dumps assist customer support personnel in resolving
problems.

Multi-protocol Support

Once a call has been established, the RA 6300 allows use of multiple
protocols, including asynchronous IP, PPP, SLIP, IPX, LAT (with
limitations) and AppleTalk, as well as synchronous IP over PPP, IPX over
PPP (IPXCP), and AppleTalk over PPP.

Содержание 6300


















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды