manualshive.com logo in svg

Bay Networks 6300, Инструкция к добавке

Поделиться
Скачать
Bay Networks 6300 Скачать руководство пользователя страница 354

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Chapter 15    Using RA 6300 Security

A-326

Book A

Disabling User Name and Password Validation

When security is enabled, users must provide a user name and password.
You can disable this policy by modifying the
/annex_root/src/erpcd/acp_policy.h file.

To disable the user name requirement, change the line that defines user
validation from:

#define USER_VALIDATION 1

to

#define USER_VALIDATION 0

Messages are logged to the security server host when users access the
CLI, but the message does not include a user name.

To disable the port password requirement, make sure the following line
is commented out (i.e., enclosed in asterisks), as follows:

/* #define PORT_PASSWORD 1 */

Linking NIS Password File Verification to ACP

You can enable several options in the acp_policy.h file by removing the
slash (/) and asterisk (*) at the beginning and the end of the definition line.

To use the NIS password file for verification through ACP, change
(uncomment) the following lines:

/* #define NATIVEPASSWD 1 */

to

 #define NATIVEPASSWD 1

/* #define NATIVESHADOW 1 */

to

 #define NATIVESHADOW 1

Содержание 6300


















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды