Bay Networks 6300, Инструкция к добавке

Страница: 282 / 593

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX
Chapter 15 Using RA 6300 Security
A-254
Book A
The following example illustrates accesscode entries in the acp_userinfo
file. When logging in, the user cobb is prompted for a user name,
password, and accesscode. If cobb enters the information at each prompt,
the Annex determines whether or not cobb’s access is via the inbound
modem pool. If so, one of the following occurs:
• If cobb enters access at the accesscode prompt, the RA 6300
calls cobb back at the number 9–765–4321 and then logs cobb
into the host calvin.
• If cobb enters promptphone at the accesscode prompt, the
RA 6300 prompts for a phone number, drops the connection,
and calls cobb back via the outbound modem pool. Then the
Annex prompt is displayed.
• If cobb enters direct for the accesscode, the Annex prompt is
displayed and no dial-back occurs.
user cobb
at_passwd nedry
at_zone bn-33net bn-55net end
accesscode access
phone_no 9\,7654321
in_pool_name inbound
out_pool_name outbound
job rlogin calvin –1 cobb end
end
accesscode direct
in_pool_name inbound
end
accesscode promptphone
in_pool_name inbound
out_pool_name outbound
end
end
pool inbound
ports asy@hobbes
ports asy@simon
end
pool outbound
ports asy@hobbes
ports asy@simon
end