manualshive.com logo in svg

Bay Networks 6300, Инструкция к добавке

Поделиться
Скачать
Bay Networks 6300 Скачать руководство пользователя страница 364

Remote Annex 6300 Supplement to the Remote Annex Administrator’s Guide for UNIX

Chapter 15    Using RA 6300 Security

A-336

Book A

Re-compiling erpcd

You must re-compile erpcd if you modify the supplied policy and the
ch_passwd utility if you changed the name of the ACP password file
from acp_passwd. The source files are in /annex_root/src/erpcd, where
annex_root is the directory to which the RA 6300’s source code was
copied. To re-compile:

1.

 cd to /annex_root/src.

2.

 To re-compile only erpcd, enter the command:

# make erpcd

3.

To re-compile both erpcd and ch_passwd, enter the command:

# make all

4.

To install, enter the command:

# make –f ../make.config –f Makefile install

This saves the old version of erpcd as OLDerpcd in the installation
directory.

5.

Kill the current erpcd and start the new one.

Содержание 6300


















































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды