14.4 Fitting the Blenheim, Sonnet, Homeflame Traditional, Debut & Coast
firefront.
1.
Place the firefront / casting on top of the
hearth centrally between the fascia.
2.
On models with a two piece firefront place
the lower front cover casting / ash pan below the
front casting. For the ‘Coast’ model see figure
57.
14.5 Fitting the ‘push on’ fascia trim for the
Blenheim, Sonnet, Homeflame Traditional,
Anthem, Debut, Aura 2 & Minima models.
See section 8.2. This should have been
completed before fitting the fire.
14.6 Fitting the Aura 2, Minima & Camden
firefront.
1.
Place the firefront on top of the hearth
centrally between the fascia.
14.7 Fitting the Anthem firefront.
1.
The Anthem firefront is fitted with a set of
fixing brackets. Each bracket has two threaded
holes. As supplied the top threaded hole should
be fitted with a 25mm long machine screw. If
the screw has been located to the threaded hole
below, remove it and locate to the hole above.
2.
The screw should be set at a distance of
15mm (Measured from the surface of the
bracket to the underside of the screw head).
Adjust the screw to this distance (See figure 58).
3.
Locate the firefront as in figure 59. The screw
heads should locate into the slots in the burner
tray.
4.
The 'ash pan' casting should be located as in
figure 60.
Page 35
INSTALLER GUIDE
Figure 59. Firefront location
Figure 58. Bracket location
Figure 57. Coast firefront location
