Page 9
User Manual
DTL-960e Single Colour Channel Digital Video Recorder
REAR PANEL CONNECTIONS
Ethernet Port
The Ethernet Port is used to view live or recorded images on a PC via the Ethernet.
The cable connection configuration depends on your network configuration:
For a DTL-960e that connects directly to a Hub, use a Straight Through connection.
For a DTL-960e that connects directly to a PC, use a Cross Over connection.
Consult with your Network Administrator for the specific type of configuration. See page 31 for information about configuring
the ethernet settings in the menu system.
Power Connector
The unit is furnished with a 12V DC power supply.
Do not use any other power supply with the unit. The manufacturer accepts no responsibility for damage caused by the
use of any other power supply.
Wire Type
Cat 5
Connector Type
RJ-45
Max Cable Length
100 feet / 30.5 meters
Minimum Cable Length
6 feet / 1.8 meters
Hub Wiring Configuration
Straight Through
PC Wiring Configuration
Cross Over
Power Supply Input:
Voltage
120 to 240 Volt AC
Tolerance
±10%
Frequency
50 to 60 Hz
Power Supply Output:
Voltage
12 Volt DC
Power
62 Watts
Connector
2.1mm barrel, Centre Positive
Figure 4 - RJ-45 Pin Configuration
For Ethernet Port
1 2 3 4 5 6 7 8
Pin
Use
1
TX+
2
TX-
3
RX+
4
Not connected
5
Not connected
6
RX-
7
Not connected
8
Not connected
All manuals and user guides at all-guides.com
