Page 15
User Manual
DTL-960e Single Colour Channel Digital Video Recorder
PLAYBACK
When data is played back on the DTL-960e, the details on the front panel LCD change accordingly:
Play Forward
To begin normal playback, press the
Play Forward
button. The unit will begin playing back data from the
beginning of the last recording session. Playback is indicated:
As
PLAY
near the upper left hand corner of the primary monitor, for three seconds.
As
PLAY>
on the LCD.
Reverse Play
To begin reverse playback, press the
Reverse play
button. The unit will begin playing back data from the
beginning of the last recording session. Reverse playback is indicated:
As
REVERSE PLAY
near the upper left hand corner of the primary monitor, for three seconds.
As
PLAY<
on the LCD.
If there is only one recording session on the hard disk, the unit will indicate
START OF DATA
on the
primary monitor.
Playback Speed
When playback commences, the unit will play the data at the rate it was recorded. However, the user can
alter the playback speed using the
Up/Down Record Speed
buttons.
Altering the playback speed overrides any change in playback speed that would occur due to an alarm
condition in the playback. To clear the override, press the
Stop
button, then press the
Play
button to
resume playback at the speed the data was recorded.
The playback speed is indicated on the LCD in Pictures Per Second.
Fast Forward & Rewind
During playback the data can be viewed at a higher than normal rate by rotating the
Shuttle
clockwise.
The data can also be viewed at a higher than normal rate in reverse by rotating the
Shuttle
counter-
clockwise. Increasing the amount of rotation increases the rate of playback. Fast Forward & Rewind are
indicated:
As
FAST FORWARD
or
REWIND
near the upper left hand corner of the primary monitor, for three
seconds.
As
FFWD
or
REW
on the LCD.
Pause
During playback, press the
Pause
button to pause playback, and display a single frame on-screen.
Pause is indicated:
As
PAUSE
near the upper left hand corner of the primary monitor, for three seconds.
As
PAUSE
on the LCD.
Single Frame Advance & Single Frame Rewind
During Pause mode, rotate the
Jog
dial to view the frame directly before or after the frame displayed on-screen.
Start of Data & End of Data
If the start or end of data is reached during playback,
START OF DATA
or
END OF DATA
is indicated near the upper left hand
corner of the primary monitor.
Figure 9 - LCD Display in Playback mode
A.
Time the data was recorded
B.
Date the data was recorded
C.
Play Forward mode indicated
D.
Normal record speed in pictures per second
12:34:45A
PLAY>
17/12/01
0.2p
A
B
C
D
REW
FF
Jog/Shuttle
PAUSE
Pause
Button
PLAY
Play Forward
Button
REC/PLAY
SPEED
Record Speed
Buttons
REVERSE PLAY
Reverse Play
Button
All manuals and user guides at all-guides.com
