Page 24
DTL-960e Single Channel Colour Digital Video Recorder
User Manual
DISPLAY SETTINGS
When the
Display Settings
menu item is selected, a sub-menu is displayed. From this sub-
menu, you can specify what status information will be displayed on the primary monitor.
Select
ON
or
OFF
, for the following items:
The current time and date.
The remaining amount of time before the hard disk runs out of record space.
The archive status.
The time and date of the last alarm.
During playback, the time and date the recording was made.
Current Time / Date
Select this menu item to set whether the current time and date are to be displayed near the upper right hand corner of the
primary monitor.
Use the
Jog
to select
On
or
Off
. To confirm the selection and exit the menu, press the
Enter
button. To exit the menu
without making changes, press the
Menu
button.
Record Capacity
Select this menu item to set whether the amount of time remaining before the hard disk runs out of record space is to be
displayed near the upper left hand corner of the primary monitor. If it is displayed, the unit shows the record capacity with
two measures of time, and switches automatically depending on the amount of time remaining:
Days and Hours
Hours and Minutes
Minutes and Seconds
Use the
Jog
to select
On
or
Off
. To confirm the selection and exit the menu, press the
Enter
button. To exit the menu
without making changes, press the
Menu
button.
Archive Status
Select this menu item to set whether the archive status is to be displayed near the upper center of the screen on the
primary monitor. If it is displayed, the unit will display either:·
ARCHIVE NOT CONNECTED
ARCHIVE READY
ARCHIVE NOT READY
Use the
Jog
to select
On
or
Off
. To confirm the selection and exit the menu, press the
Enter
button. To exit the menu
without making changes, press the
Menu
button.
Last Alarm
Select this menu item to set whether the time and date of the last alarm are to be displayed near the upper right hand
corner of the primary monitor. If it is displayed, the unit will display
NONE
if there is no previous record of an alarm.
Use the
Jog
to select
On
or
Off
. To confirm the selection and exit the menu, press the
Enter
button. To exit the menu
without making changes, press the
Menu
button.
Playback Time / Date
Select this menu item to set whether the time and date the recording was made (during playback) are to be displayed
near the upper right hand corner of the screen.
Use the
Jog
to select
On
or
Off
. To confirm the selection and exit the menu, press the
Enter
button. To exit the menu
without making changes, press the
Menu
button.
Current Time / Date
Record Capacity
Archive Status
Last Alarm
Playback Time / Date
All manuals and user guides at all-guides.com
