Page 4
DTL-960e Single Channel Colour Digital Video Recorder
User Manual
IMPORTANT SAFEGUARDS
This product is exclusively for use in CCTV applications and has no other purpose.
Read and Retain these instructions -
All the safety and operating instructions should be read before the unit is operated
and should be retained for future reference.
Cleaning
- Unplug the unit from the supply outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or
aerosol cleaners.
Attachments
- Do not use attachments that have not been recommended by the product manufacturer as they may
cause hazards.
Water and Moisture
- Do not use this unit near water. For example, near a bathtub, wash bowl, kitchen sink, or laundry
tub, in a wet basement, near a swimming pool, in an unprotected outdoor installation, or any area that is classified as a
wet location.
Accessories
- Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious
injury to a person and serious damage to the unit. Any mounting of the unit should follow the manufacturers instructions,
and should use a mounting accessory recommended by the manufacturer.
Ventilation
- Openings in the enclosure are provided for ventilation to ensure reliable operation of the unit and to protect
it from overheating. These openings must not be blocked or covered, and therefore this unit should not be placed in a
built-in installation unless proper ventilation is provided. Do not place directly on other hot equipment, because this may
increase its operating temperature.
Power Sources
- This unit should be operated only from the class 2 isolated power supply provided.
Power-cord Protection
- Power-supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, and the point where they exit from the
appliance.
Overloading
- Do not overload outlets and extension cords as this can result in a risk of fire or electric shock.
Object and Liquid Entry
- This equipment must be protected from the ingress of foreign materials. Never push objects of
any kind into this unit through openings as they may touch dangerous voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any kind on the unit.
Servicing
- There are no user-serviceable parts. Do not remove the covers as this may expose you to dangerous voltages
or other hazards. Refer all servicing to qualified service personnel.
Replacement Parts
- When replacement parts are required, be sure the service technician has used the replacement
parts specified by the manufacturer. The use of unauthorised substitute components may result in fire, electric shock or
other hazards.
Safety Check
- Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks
to determine that the unit is in proper operating condition.
Coax Grounding
- If an outside cable system is connected to the unit, be sure the cable system is grounded.
Lightning
- For added protection of this unit during a lightning storm, or when it is left unattended and unused for long
periods, unplug it from the wall outlet and disconnect the cable system. This will prevent damage to the unit due to
lightning and power-line surges.
PRODUCT SAFETY
Installation is only to be carried out by competent, qualified and experienced personnel in accordance with the
country of installations National Wiring Regulations.
Your Digital Recorder contains no user-serviceable parts.
This unit contains a lithium battery whose expected life is in excess of five years. If your Digital Recorder loses its
settings each time it is switched off then the battery needs replacing. In this instance return your Digital Recorder
to Baxall Limited and we will replace the battery.
There is a danger of explosion if the lithium battery is incorrectly replaced. Replace only with the same or an
equivalent type recommended by the manufacturer. Dispose of unused batteries according to the manufacturers
instructions.
Your Digital Recorder must not be used in a medical and/or intrinsically safe application.
Do not exceed the voltage and temperature limits given in the specification. Only operate your Digital Recorder in
a clean, dry, dust-free environment.
All manuals and user guides at all-guides.com
