CDR Series
Installation Instructions
32
VIDEO ADJUSTMENT
The Video Adjustment menu item opens a menu allowing various video settings to be
made.
PEDESTAL
Options: Min to Max over eight steps
This parameter sets the black level. The pedestal level is factory set to 50mV. Adjustment
is provided if needed due to cable attenuation, etc.
APERTURE COR
Options: Min to Max over eight steps
This parameter adjusts the Aperture Correction (picture/edge sharpness/enhancement) of
the camera.
LUMA LEVEL
Options: Min to Max over eight steps
The Luma (Luminance) Level parameter is used to set the brightness information of the
signal. The luma level is factory set to 700mV. Adjustment is provided if needed due to
cable attenuation, etc.
CHROMA LEVEL (Colour Cameras Only)
Options: Min to Max over eight steps
This parameter allows you to change the reference signal used by the monitor to determine
the colour information of the video signal (colour burst signal). Chroma level is factory set
to 300mV. Adjustment is provided if needed due to cable attenuation, etc.
Note that adjustments made to this parameter may not always be apparent on certain
monitors.
ATW SPEED
Options: Hi to Lo over eight steps
This parameter allows you to change the speed at which the auto-white balance mode
operates.
VIDEO ADJUSTMENT
PEDESTAL
Min------
n
--Max
APERTURE COR
Min----
n
----Max
LUMA LEVEL
Min----
n
----Max
CHROMA LEVEL
Min----
n
----Max
ATW SPEED
Hi----
n
----Lo
EXIT
ADVANCED SETTINGS
AUTO BLACK
ON
VIDEO ADJUSTMENT
INFO
RESTORE FACTORY
EXIT
