Installation Instructions
CDR Series
33
INFO
Selecting the INFO menu item will reveal a display similar to the one below.
None of the parameters can be edited and are supplied for information purposes only.
Press the select key to exit this display.
S/W VERSION
This field shows the software version for the camera.
CCD TYPE
This field shows the CCD sensor type fitted in the camera.
TELEM TYPE
This field shows the type of telemetry (standard, enhanced or ZTTP) being received by the
camera.
SECONDS SINCE RESET
This field displays the number of seconds elapsed since the camera was reset.
RS485 ADDRESS
This field displays the address that has been assigned to the camera. This can be changed
in the Global Settings menu. See page 39 for details.
RESTORE FACTORY
By selecting this RESTORE FACTORY option, you can restore the original factory settings.
You can then use the SAVE & EXIT option from the Menu Selection screen to save the
factory settings. You will be asked to select which Group you want to save the settings to
(GRP 1, GRP 2, etc.). It should be noted that the Restore Factory option is not global, and
will only restores the factory settings to the settings group that you are currently working
with.
INFORMATION
S/W VERSION
2.2.2
CCD TYPE
249K
TELEM TYPE
BAXALL
SECONDS SINCE RESET
5684
RS485 ADDRESS
2
PRESS SELECT WHEN DONE
ADVANCED SETTINGS
AUTO BLACK
ON
VIDEO ADJUSTMENT
INFO
RESTORE FACTORY
EXIT
ADVANCED SETTINGS
AUTO BLACK
ON
VIDEO ADJUSTMENT
INFO
RESTORE FACTORY
EXIT
