CDR Series
Installation Instructions
16
THE MENU SYSTEM
CDR series cameras utilise a menu system to facilitate setup and adjustment. The menu
system is password protected by means of a four digit number to prevent unauthorised
tampering and has two levels Basic and Advanced. It is important that the installer sets up
both a basic and an advanced password as until this has been done, access to the menu
system will be unrestricted. For more details on setting up passwords, see page 41.
Once the password scheme has been implemented, it provides access to the Basic level
or both the Basic and Advanced levels. The top level menu hierarchy is shown below.
PASSWORD
ADVANCED
SETTINGS
BASIC
SETTINGS
SAVE
& EXIT
GLOBAL
SETTINGS
SET
PASSWORDS
RESTORE
SETTINGS
LANGUAGE
SELECTION
A special password is used to access the Language menu, where the language in which
the menu system is displayed can be selected. See
Selecting a Language
on page 17.
ENTERING THE MENU SYSTEM
Entering the password
To enter the menu system, a password providing access to the Basic Settings menu or the
Advanced Settings menu must be input by the user. Note that entering a password to
access the Advanced Settings menu will automatically provide access to the Basic Settings
menu. The manner in which the password is entered depends on whether the camera is
being controlled remotely or locally using the built-in joystick.
1.
Local
: Press the joystick inwards, or,
Remote
: If you are using a telemetry controller, press the Autopan key once. The
Autopan key will switch off automatically when a command is next sent via the keyboard
joystick.
2. The screen shown below will appear:
PASSWORD ENTRY
* * * *
USE ARROW KEYS
PRESS SELECT WHEN DONE
