Installation Instructions
CDR Series
7
PRODUCT SAFETY
Installation and servicing is only to be carried out by suitably qualified and
experienced personnel to local or national wiring standards.
Good engineering practice must be carried out at all times and all servicing and
repairs carried out indoors.
All CDR series cameras are to be powered with a class 2 power supply.
The CDR series camera is fitted with a 1 A time-lag fuse located on the rear
board assembly. Replacement must be with an identical type of fuse.
Under no circumstances must the power consumption of the rear Auto Iris
connector exceed 50 mA or the Direct Drive connector exceed 25 mA.
The CDR series range is designed for use in general purpose CCTV applications
and has no other purpose.
Only operate the camera between the temperatures of -10
O
C and +50
O
C.
We strongly recommend that the camera passwords are changed by the installer
as soon as possible to prevent unauthorised access to the menu system.
