Bavaria VIRTESS 420, Руководство пользователя

Страница: 31 / 90

Systems (some optional)
31
Filling level Display Virtess 420 Fly and Coupé:
Pictogram Level
31 Consumer battery
32 Battery hydraulic pump
33 Battery bow thruster
34 Black water
35 Grey water
36 Fresh water
Settings display Virtess 420 Fly and Coupé:
Pictogram Level
1 Home
2 Lights-Multimedia
3 Consumers
4 Filling levels
5 Settings
38 Reset Display
39 Reset System
The settings and diagnosis screen displays the modules connected with the BUS System (B1 – B4, with their respec -
tive addresses (Adr) 1-4). It also shows the sensor modules (5) which process the filling levels of water tanks and the
status of charge of the single batteries.
Each module is addressed by a number, see the respective display above.
The designation type indicates the module type: The number „1“ stands for sensor module, the number „2“ for switch
module. For each connected switch module a circular symbol represents a Port (A1-A9). These are displayed in grey if
this relay is inactive, a green circle stands for an actively switched relay.
If the circles are missing, the respective module may not be recognized by the BUS system
The above screen shows, that the sensor module does display numbers 0 (means inactive) and 1 (means active).
These correspiond to the water filling sensors in the tanks. The three numbers aft (12.6/0,0/12.1) reflect the battery
charging levels. If no numbers are displayed, the module is not active.
The buttons 38 and 39 allow you top reset the display (38) or to reboot the whole system (39). In the event of a com -
plete reboot, all relays are set inactive and therefore are disconnected from the power supply.
1 37 2 3 4
31 33
36 35 34
1
37 2
3 4
38
39
Adr
1
2
3
4
5
Typ Fw Err
2 1.3 0
2 1.2 0
2 1.3 0
2 1.3 0
1 1.2 0 1 0 0 0 0 12.6 0 12.1 0.0