background image

Systems (some optional)

39

Warning

To minimise shock and fire hazards:

 

» Turn off craft‘s shore-power connection switch before connecting or disconnecting 

shore-power cable.

 

» Connect shore-power cable to craft‘s inlet before connecting to shore power source.

 

»

Disconnect shore-power cable at shore-power source first

 

» Close shore-power inlet cover tightly.

 

»

Do not alter shore-power cable connectors & use only compatible connectors.

i

Information

 

» The nominal activation current is marked on each fuse

 

»

To avoid a power spike, turn OFF all main breakers before plugging IN the shore 

power cord.

 

»  Securely connect the power inlet of the boat and the shore power receptacle with an 

integrated safety switch. 

 

» If the connection is broken and later re-secured, the main breaker will trip. Connec-

tions must be secure for uninterrupted dock-side service.

7.9.  Informations on the save operation of the sliding glass roof top 

(see „6.4. Deck plan of the in der Coupé-Version, plan view and perspective“ page 17)

The electric drive of the sliding roof is equipped with an overvoltage protection in case the free movement is blocked.  
This is dependent on a permissible current. The current is not a function of the pressure force that the sliding mecha-
nism exerts on the item that blocks the way of movement. The pressure force is not monitored, this is dependent on  
several  factors such as the weight of the roof top, temperature, loading condition  of the batteries,  contamination 
of the racks etc. 

There is no defined  emergency stop - but the sliding Coupé roof does only move when the button is pressed, re

-

leasing the button will stop the movement. The buttons are positioned in such a way, that the operator has good 
visibility over the sliding part and may therefore monitor closely the movement.

Danger - Warning

Access and stay on the Coupé deck is forbidden when under way or in a strong seaway. This 
part of the boat is not part of the working deck area.
Please be aware of the fact that you may experience abrupt and violent movements and 
accelerations on the Coupé deck. Children not accompanied by an adult are not allowed on 

the Coupé deck. Use the Coupé deck only to sit and lie. 
The maximum capacity of the Coupé deck are 4 people (75 kg each).

The area just behind the sliding roof and in front of the sun bathing area will be taken by the 
sliding roof when displaced aft (i.e. when opening the roof). There is a permanent danger of 

crushing and squeezing.

The maximum load on the 

Coupé deck is 300kg

.

Содержание VIRTESS 420



























































































Отзывы: