Bavaria VIRTESS 420 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 90

Bavaria VIRTESS 420 Скачать руководство пользователя страница 4

BAVARIA Owner’s manual

4

1. Introduction

For your own comfort and safety, please make sure, that you have received all the necessary information and docu

-

mentation about the ships systems from the previous owner of the craft. Please keep this manual in a secure place
and hand it over to the new owner when you sell the craft. On board ship, it is strongly recommended to only keep a
high quality copy of this manual in a waterproof cover and leave the original in a secure place.

This manual shall help you to enjoy your Virtess 420 in a safe and responsible manner. Besides the information on

the boat itself this manual contains information on handling and maintenance of the boat. Special attention hast e
be given to systems on board that require sea water circulation for cooling, such as the air conditioning units. Those
systems rely upon measures to be taken before they are even switched on. Please read this document carefully and
familiarize yourself with the craft before using it. Please ensure that you have adequate experience before assuming
command of the craft.

Should this be your first recreational power boat, or if you are not yet familiar with the special characteristics of such

a dynamic and responsive powerboat, please make sure that you receive proper training before you start any voyage,
this is for your own safety and comfort. Do not hesitate to contact your dealer for information on further training. The

yard itself or your local dealer will certainly help you to find an appropriate partner, in case you wish to freshen up your

knowledge regarding boating

Regardless of the craft‘s seaworthiness and its certified design category, protection from freak sea and wind condi

-

tions cannot be guaranteed. Beware of offshore winds and currents. The ability, experience and fitness of the crew
should be taken into consideration before you embark on a journey.

As the scope of delivery may vary depending on the individual order, the equipment of your motor yacht may deviate
from some of the descriptions and illustrations contained in this manual. To be able to constantly upgrade our yachts
to state-of-the-art standard we reserve the right to alterations in form, equipment and technological standard. It is
for that reason that no claims can be derived from data, illustrations and descriptions contained in this manual.

BAVARIA Yachtbau GmbH would like to welcome you as a new owner of a BAVARIA power boat and would also like to
thank you for placing your confidence in our products by acquiring this yacht.
Your contracting party and the management, together with the staff of BAVARIA YACHTBAU GmbH do sincerely wish
you lots of enjoyment with your Virtess 420.

We do wish you a safe journey at all times and may there always be enough water beneath your keel.

BAVARIA YACHTBAU GmbH

The Management

Lutz Henkel

«
...
2
3
4
5
6
...
»

Содержание VIRTESS 420



























































































Отзывы:

Нет отзывов