manualshive.com logo in svg

Baumer hhs ULT 400 XL, Руководство по эксплуатации, Страница: 34 / 53

Поделиться
Скачать
Baumer hhs ULT 400 XL Скачать руководство пользователя страница 34

Detailed information on the electrical connection of the sensor can

be found in the operating manual for the system control.

Ensure the following before electrical connection:

n

Only approved cables are used for the connections.

n

All long or hanging cables are secured with an approved

mounting system.

n

All electrical connections are clean.

1.

Ensure the higher-level machine is securely switched off with

the power disconnected.

Disconnect the higher-level machine from the mains if neces-

sary and ensure it cannot be switched back on unintention-

ally.

Follow the circuit diagram
Please refer to the wiring and circuit diagrams for elec-

trical connection.

2.

Connect the sensor with the plug to the system control cab-

inet.

ð

The sensor has now been electrically connected.

Assembly and installation

Electrical connection ULT 400 XL  > Sensor ULT 400 XL

04.05.2021

ULT 400 XL

34

Содержание hhs ULT 400 XL






















































Отзывы:

Нет отзывов