NOTICE!
Damage due to removal of sensor under voltage
Removing the sensor from the system control cabinet
under voltage may damage the electronics or cause a
data loss.
–
Only remove the sensor from the system control
cabinet when the cabinet is switched off.
–
Only remove the sensor from the system control
cabinet when the cabinet is switched off.
NOTICE!
Property damage due to improper cleaning
Unsuitable cleaning agents and methods can lead to
material damage on the sensor and other components.
–
The lenses and protective glass of sensors should
only be cleaned with a damp cleaning cloth.
–
Only exert slight pressure on displays, LEDs and
buttons.
–
Never apply cleaning agent directly to displays,
LEDs or buttons.
–
Always use a cleaning agent with a flash point
above 55 °C.
–
Always check that the cleaning agent is suitable for
cleaning the surfaces that require cleaning.
–
Never use abrasives, solvents or other aggressive
cleaning agents for cleaning.
–
Never clean using steam or compressed air.
–
Never clean using a jet of liquid (e.g. pressure
washer).
–
Never scratch off dirt using sharp objects.
Safety and responsibility
Component-specific safety guidel... > Sensor ULT 400 XL
04.05.2021
ULT 400 XL
25