WARNING!
Risk of injury due to improper commissioning
Improper commissioning can result in serious injuries
and considerable material damage.
–
Always ensure, before commissioning, that all
installation work has been carried out and com-
pleted in accordance with the information and
instructions set out in this manual and the associ-
ated circuit diagrams.
–
Always ensure, before commissioning, that all
safety equipment is functioning correctly.
–
Always ensure that nobody is in the hazard zone
before commencing commissioning.
–
Commissioning should be carried out only by
authorized and trained personnel.
If commissioning is to be carried out by other per-
sons ensure the following:
–
The individuals must have read and understood
this operating manual.
–
The individuals must follow the instructions in
this operating manual.
–
The individuals must have the necessary spe-
cialist skills for such assembly and installation.
NOTICE!
Material failure due to the maximum storage period
being exceeded
The physical properties of hydraulic hose lines change
over time if they are not used. This can lead to material
failures. If commissioning takes place at least 2 years
after delivery, the following must be observed:
–
Always check the hydraulic hose line for damage
and material change.
NOTICE!
Risk of material damage due to contamination
Contamination can cause material damage by affecting
system components.
–
Always cover at-risk parts of the equipment before
work such as drilling.
–
Always collect dust and shavings immediately
throughout the assembly process.
Improper commissioning
Hydraulic hose lines
Contamination
Safety and responsibility
Safety guidelines for assembly a...
04.05.2021
ULT 400 XL
22