Baumer hhs ULT 400 XL Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 53

Baumer hhs ULT 400 XL Скачать руководство пользователя страница 32

5

Assembly and installation

5.1 Assembly ULT 400 XL

5.1.1 Sensor ULT 400 XL

Personnel:

n

Qualified mechanic

Protective equipment:

n

Protective work clothing

n

Safety boots

DANGER!
Risk of injury when entering the operating space of

the super-ordinate machine and its moving parts

CAUTION!
Risk of injury due to improper assembly and instal-

lation

NOTICE!
Risk of damage to the equipment due to contamina-

tion

Prepare the system for installation of the sensor.

Have all of the necessary manuals to hand and ensure that the

connections are clean and properly available.

1.

Ensure the higher-level machine is securely switched off with

the power disconnected.

Switch off the higher-level machine as necessary and ensure

it cannot be switched back on unintentionally.

2.

Install the sensor in the required position.

Use the mounting holes on the sensor.

11 “Technical data” on page 48

3.

Ensure the following when installing the sensor:

n

The sensor is mounted centrally above the adhesive

track.

n

The sensor is aligned transverse to the adhesive track.

Assembly and installation

Assembly ULT 400 XL > Sensor ULT 400 XL

04.05.2021

ULT 400 XL

32

«
...
30
31
32
33
34
...
»

Содержание hhs ULT 400 XL






















































Отзывы:

Нет отзывов