background image

 

30

Removing the side racks for cleaning 

 
 

o

 

For an effective cleaning of the 
oven side guide rails, these can 
be extracted by unscrewing the 
knurled nuts.  

 

o

 

To fit the rails back in their place, 
first insert rear pins in the holes 
and then secure them with the 
knurled nuts.  

 

 

Installation 

 

The installation must be carried out by a suitably 
qualified person, in accordance with the current 
version of the following. 
 

o

 

UK Regulations and Safety Standards or their European 
Norm Replacements. 

o

 

Building Regulations  (issued by the Department of the 
Environment). 

o

 

Building Standards (issued by the Scottish Development 
Department). 

o

 

IEE Wiring Regulations. 

o

 

Electricity At Work Regulations. 

o

 

Gas Safety (Installation and Use) (Amendment) 
Regulations.
 

 
Positioning 
 

The adjacent furniture and all materials used in the 
installation must be able to withstand a minimum 
temperature of 85°C above the ambient 
temperature of the room it is located in, whilst in 
use. 

 

o

 

Your appliance is heavy, so you should be careful when moving 
or positioning it. 

 

o

 

Do not  try to move the cooker by pulling on either the door, 
handle or control panel. 

 

Содержание BCD901SS

















































Отзывы: