manualshive.com logo in svg

Bauer Rainstar TX Plus E, Руководство по эксплуатации, Страница: 17 / 92

Поделиться
Скачать
Bauer Rainstar TX Plus E Скачать руководство пользователя страница 17

 

 

Operating manual for 

BAUER RAINSTAR series

 TX Plus 

9 

 

 

 

Machine supports slide to the ground automatically. 

 

 

 

 

Drive the supports into the ground with the detachable hand 
wheel ... 

 

 

 

......... and secure the supports with lock bolts. 

 
If your RAINSTAR 90 TX 

Plus

 is equipped with the „hydraulic machine supports“ option, couple  both hydraulic 

hoses with the tractor’s hydraulic system and extend the supports.   
 

 

 
The standard RAINSTAR equipment does not include a control unit (Optional). 
Therefore the tractor’s hydraulic system must be switched over accordingly after the 
hoses have been coupled.  If this is not possible exchange the two hoses. 
 

 
On very hard soil the machine supports must be lowered or extended into the holes dug into the ground for this 
purpose.  
Machine supports are equipped with a spike which penetrates the soil very easily with the „hydraulic supports“ 
option.   

5.2.2  LOWERING THE CART  

 

 

 

Disengage the mechanical locking of the cart in the operating 
position. 

 

WARNING!

 

WARNING!

 

Содержание Rainstar TX Plus E





























































































Отзывы:

Нет отзывов