Basler BE1-50/51B-217, Инструкция по эксплуатации

Страница: 13 / 49

BE1-50/51B-217 General Information
1-8
0.1
1
1 0
1 0 0
1 0 0 0
0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Multiple of Tap
xD (Seconds)
S
L
I
C
E
V
B
M
F
D
50/51 Output Output contacts are surge protected and rated as follows:
Resistive:
120/240 Vac Make and carry 30 amperes for 0.2 seconds, carry 7 amperes for 2
minutes, 3 amperes continuously, and break 5 amperes.
125/250 Vdc Make and carry 30 amperes for 0.2 seconds, carry 7 amperes for 2
minutes, 3 amperes continuously, and break 0.3 ampere.
Inductive:
120/240 Vac, Make and carry 30 amperes for 0.2 seconds, carry 7 amperes for 2
125/250 Vdc minutes, 3 amperes continuously, and break 0.3 ampere. 0.3 amperes.
(L/R = 0.04).
This chart vertical axis x D (Seconds) is applicable for all curves and is derived from
multiplying the curve selected times D (the TIME DIAL setting).
Figure 1-6. Integrating Reset Characteristic Curve,
AUX Output Output contacts can be configured in the field using jumpers to select
closing on either/or timed or instantaneous trip. Output contacts are surge
protected and rated as follows:
Resistive:
120/240 Vac Make 30 amperes for 0.2 seconds, carry 7 amperes continuously, and
break 5 amperes.
125/250 Vdc Make 30 amperes for 0.2 seconds, carry 7 amperes continuously, and
break 0.3 ampere.