CLI-REL1AUX1-00 | 009-1805-00 | 190613
Copyright 2019 Savant Systems, LLC
45 Perseverance Way, Hyannis, MA 02601
| 508.683.2500
1 of 2
Top Panel
Left Side Panel
A
Blinking Green
RS-485 communications is not estab-
lished. Once power is applied, it can take
up to 20 seconds to establish communi-
cations.
HELPFUL!
If communications was es-
tablished and subsequently lost,
the LED will stay solid for about 1
minute before it starts blinking.
.5s
1s
1s
Repeat
.5s
Solid Green
RS-485 communication is established.
Module is communicating with thermo-
stat.
B
Climate Relays
- The relay outputs on this module operate
similar to the relays of the same name on the thermostat.
Connect the relay outputs (W1, W2, Y1, etc) to the appropri-
ate connection on the HVAC system equipment. Refer to the
section when making the connections.
Climate Relay LEDs
- The LEDs associated with each relay
will light when the relay is energized and be off when relay is
in its idle state.
C
Auxiliary Relay
- An additional relay is available for con-
trolling external HVAC equipment such as a vent damper,
humidifier, or dehumidifier. Refer to the
section on the next page for wiring information.
D
24V AC input
- To power the module as well as supply power
to the W1, W2, and O relays, connect a 24V AC transformer
between the C and RH terminal. To supply power to the Y1,
Y2, and G relays, add a jumper between the RH and RC ter-
minals or connect a separate 24V AC source between the C
and RC terminals. See the
section on next
page for wiring information.
A
RS-485 Port
- As shown above, the right three pins connect
to the RS-485 terminals in thermostat. Refer to the
section on the next page for more information.
(1)
HVAC Relay Module - (CLI-REL1AUX1)
(2)
3 Position Screw Down Plug-In Terminal Block (028-0736)
(1)
6 Position Screw Down Plug In Terminal Block (028-0737)
(1)
6 Position Screw Down Plug In Terminal Block (028-9352)
(1)
Product and Regulatory Insert (009-1707)
Box Contents
Specifications
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
Power
Input Power
24V AC (19.2 - 28.8V AC)
Max Current Draw
0.2 amps (rms)
Maximum Wiring Distances
RS-485
Up to 1000 feet (304.8 meters) cumulative.
Power
#24 AWG - 20 feet (6.10 meters)
#20 AWG - 57 feet (17.37 meters)
#18 AWG - 90 feet (27.43 meters)
#16 AWG - 143 feet (43.59 meters)
#14 AWG - 228 feet (69.49 meters)
Minimum Supported Release
Climate Config App Version 1.1.2
Regulatory
Safety and
Emissions
FCC Part 15
Contains FCC ID:
2AEHU-MESHTEK-H52
Contains IC:
20059-MESHTEK52
RoHS
Compliant
Dimensions and Weights
Height
Width
Depth
Weight
CLI-REL1AUX1
3.77 inch
(9.58 cm)
3.16 inch
(8.03 cm)
.91 inch
(2.31 cm)
< 1 lbs
(< .5 kg)
Shipping
6.25 inch
(15.88 cm)
4.8 inch
(12.19 cm)
1.25 inch
(3.18 cm)
< 1 lbs
(< .5 kg)
A
B
Relay
Status
W1
W2
Y1
CLI-REL1AUX1-00
S/N:
UID:
SHR180901332
001AAE09CA2D0065
Y2
G
O
Aux
Com
NO
NC
C
RH
RC
C
D
A
Gnd
N/C
N/C
N/C
B (TX-)
A (TX+)
Relay Module with One 6-Port Climate Relay and One Aux Relay
Quick Reference Guide
