Basler A400K, Руководство пользователя

Страница: 10 / 176

Introduction
1-2 Basler A400k
DRAFT
2. Scroll down until you find the
“Camera Information” group
heading. If there is a plus sign
beside the Camera Information
group heading, click on the
plus sign to show the list of
parameters in the group.
3. Find the parameter called
“Camera Version.” As shown in
Figure 1-1, the last two
numbers of this parameter are
the camera version ID number.
1.2 Camera Versions
A400k series area scan cameras are available in different versions; the version depends on the
maximum frame rate and the Camera Link interface. All versions are available in monochrome
models (A402k, A403k, A404k) and in color models (A402kc,
A403kc, A404kc).
Throughout the manual, the camera will be called the A400k. Passages that are only valid for a
specific version will be so indicated.
Throughout the manual, the statements relating to the monochrome versions also apply to the
color versions. The color versions will specifically be referred to only when necessary.
L
You can also access the camera version ID number by using binary commands to
read the Camera Version Inquiry register. (See Section
4.2.1 for an explanation of
inquiry registers and Section 4.3 for information on using binary commands.)
Camera Version Max. Frame Rate Camera Link Interface
A402k 24 fps Base configuration
A403k 48 fps Medium configuration
A404k 96 fps Full configuration
Table 1-1: Versions of the A400k Series Camera
This is the
camera
version
ID Number
Figure 1-1: CCT+ Window