Basco Infinity 1413, Руководство по установке

Страница: 8 / 11

Align the deflector [ Q ] to the bottom of the
door with the hinge side notch over lapping the hinge,
then mark the strike side even with the door edge cut
deflector at that point.
13
INTERIOR
Place the deflector onto the bottom of the door
and from inside the shower, close the door and mark
the deflector at the edge of the strike jamb. Open the
door and remove the deflector. Notch the inside portion
of the deflector so the door will close to the strike jamb.
Replace the deflector back on the door; close the door
to check for clearance.
14
EXTERIOR
Inspect the pieces of black glazing vinyl, and
note the two different profiles. The smaller shape [ HH ]
is installed vertically and the larger shape [ JJ ] is
installed horizontally. For structural strength and
maximum water resistance, these vinyls are designed to
fit tightly between the glass and framing. To speed
installation, use glass cleaner for lubrication and a
small block of wood to press the vinyl into place.
15
FIXED GLASS PANEL
VERTICAL HORIZONTAL
1/4” GLASS
REQUIRES :
3/16” GLASS
REQUIRES :
V-219 V-220
V-226 V-225
NOTCH NOTCH
STANDARD SIZES
SHIPPED WITH
4 PIECE VINYLS
(TEAR APART)
QCI0029 REV. 1 Page 8 of 11 Certified 07/06/05