Slide the door [
I
] magnet onto the strike edge
of the door panel. Close the door and slide the handle
up or down until the two magnetic strips are aligned.
Use a pencil or masking tape the mark the location of
the magnet on the door.
Slip the vinyl material onto the door between the marks
and carefully drive the door magnet on the door panel.
Trim excess vinyl material off with a utility knife.
Close the door and check for proper operation of the
magnetic catch.
NOTE:
Never hit the door magnet with a metal
hammer.
10
INTERIOR
VINYL
STRIKE
JAMB
MAGNETIC
LATCH
MAGNET
1/8”
SEE SUPPLEMENT INSTRUCTION SHEET
FOR INSTALLATION OF EITHER THE “C” PULL
HANDLE OR “C” TOWEL BAR COMBO.
11
NOTE:
The deflector [
Q
] is notched on both
ends. To install deflector, determine if the door is hinge
right or hinge left.
12
QCI0029 REV. 1
Page 7 of 11
Certified 07/06/05
