- 66 -
6.4.3 Temperature setting and automatic pre-heating
Fig. 15
Select the temperature setting option on
the display (
S2,
, fig. 15
). The temperature
value is adjusted with use of knob
M
,
increased in the clockwise direction or
decreased in the counterclockwise
direction.
Pressing the knob
M
or key
S2
on the
display confirms the selected value.
Automatic pre-heating of the device
After setting the value of temperature in the chamber it is possible to start the pre-
heating function by pressing key
S10
(
fig. 15
): After activation of pre-heating S10 is red.
Fig. 16
The device automatically determines the
pre-heating temperature and sets it to
temperature higher than preset by 22%
.
Reaching of the pre-heating temperature
is signalled with the acoustic signal and
displaying the window (
fig. 16
).
IMPORTANT
During the automatic pre-heating the
device chamber must be empty. Wait
until the end of pre-heating before
placing anything in the chamber.
Manual
Phase 1/4
Manual
Pre-heating
Pre-heating
OK!
Wed 16-04-14 16:15
Wed 16-04-14 16:15
