- 68 -
6.4.6 Manual setting of vapours outlet
Fig. 19
In
AIR CIRCULATION
mode select the
outlet position by pressing symbol
S4
(
fig. 19
) on the display. Available positions
Vapours outlet opened
Vapours outlet closed
The vapours outlet is designed for
maintaining the humidity in the device
chamber or reducing it. When the outlet is
opened the fans speeds and humidity
releasing are higher.
6.4.7 Manual air moisturizer
Fig. 20
In
AIR CIRCULATION
or
COMBI
mode it
is possible to set the humidity manually by
pressing symbol
S6
(
fig. 20
) on the
display.
It causes direct injection of water to the
fan, which then evaporates in the device
chamber.
The water is injected as long as the symbol
is pressed.
6.4.8 Setting of percent humidity level in COMBI mode
Fig. 21
In order to set the percent steam level in
AIR CIRCULATION
mode press symbol
S4
(
fig. 21
) on the display and use knob
M
to select appropriate level, rotating it
clockwise to increase or counterclockwise
to decrease it
.
Confirm selection by
pressing knob
M
or symbol
S4
. The
humidity level may be set gradually every
five percents (0-5-10-15-20%...) .
Manual
Phase 1/4
Roasting
Phase 1/1
Roasting
Phase 1/1
Wed 16-04-14 16:15
Wed 16-04-14 16:15
Wed 16-04-14 16:15
