Bartec APEX (APC) 07-3704 Series, Руководство по эксплуатации

Страница: 23 / 44

Transport and storage
APEX / SILAS
Pressurized Cabinet
Page 20 of 40 01-3704_7D0001_Manual_APC-SPC_20200617_jrs_en.docx Rev.-
4 Transport and storage
Scope of delivery
Missing parts or damage must be reported immediately in writing
to the forwarding agent, the insurance company or BARTEC
GmbH.
Check the completeness of the scope of delivery using the delivery note.
As standard, each APEX (SILAS) pressurized cabinet is delivered with the
following scope of delivery:

Connection plan with transfer point between Ex p and protected
application

Technical drawing

Operating instructions for the APEX (SILAS) pressurized cabinet

Operating instructions for the Ex p control unit
Packaging
The Ex p control unit is delivered packed in film, on pallets and/or in boxes.

Dispose of the packaging materials at the designated disposal points.
Observe the applicable national regulations for disposal
Transport
WARNING
DEATH OR RISK OF INJURY FROM FALLING HEAVY SUSPENDED LOADS.

Never stand under suspended loads.

Secure the APEX (SILAS) pressurized cabinet before transport using
suitable fastening (e.g. straps)
ATTENTION
AVOID HARD IMPACTS, E.G. BY FALLING DOWN OR SETTING DOWN TOO
VIGOROUSLY.
The APEX (SILAS) pressurized cabinet may be damaged.

Only use hoists and load handling attachments with sufficient load
bearing capacity.

The permissible lifting weight of a lifting device may not be exceeded.

Slowly set down the APEX (SILAS) pressurized cabinet.
Observe the weight of the goods to be transported and select an adequate
transport device.