BART LAB-DM2, Руководство по эксплуатации

Страница: 32 / 40

Manuale Operativo
MO. DMM.414.R8
Operating Manual
page 31
I
GB
F.S. USCITA ANALOGICA ANALOG OUTPUT F.S. $OAIISNNNNN<cr> $IIACK<cr> NNNNN = 0÷99999
RESET CALIBRAZIONE / CALIBRATION RESET $CRII<cr> $IIACK<cr>
CAMPO 1 FIELD 1 $I1IINNNNNNNNNNNNNNNN<cr> $IIACK<cr> N = ascii char
CAMPO 2 FIELD 2 $I2IINNNNNNNNNNNNNNNN<cr> $IIACK<cr> N = ascii char
CAMPO 3 FIELD 3 $I3IINNNNNNNNNNNNNNNN<cr> $IIACK<cr> N = ascii char
PUNTO DECIMALE DECIMAL POINT $DPIIN<cr> $IIACK<cr>
N = 0  5
COMANDI DI LETTURA / READING COMMANDS MESSAGGIO / MESSAGE RISPOSTA / ANSWER
VALORE DI MISURA MEASUREMENT VALUE $DAII?<cr> $IISNNNNNNUUU<cr>
FILTRO DIGITALE DIGITAL FILTER $FDII?<cr> $IIN<cr>
RISOLUZIONE RESOLUTION $RDII?<cr> $IINNN<cr>
TIPO DI PICCO (PEAK TYPE) $PSII?<cr> $<cr> or $IIPEAK-<cr>
SET-POINT 1 SET-POINT 1 $P1II?<cr> $IISNNNNN<cr>
SET-POINT 2 SET-POINT 2 $P2II?<cr> $IISNNNNN<cr>
DELTA-POINT 1 HYSTERESIS 1 $D1II?<cr> $IINNNN<cr>
DELTA-POINT 2 HYSTERESIS 2 $D2II?<cr> $IINNNN<cr>
F.S. USCITA ANALOGICA ANALOG OUTPUT F.S. $OAII?<cr> $IISNNNNN<cr>
CAMPO 1 FIELD 1 $I1II?<cr> $IINNNNNNNNNNNNNNNN<cr>
CAMPO 2 FIELD 2 $I2II?<cr> $IINNNNNNNNNNNNNNNN<cr>
CAMPO 3 FIELD 3 $I3II?<cr> $IINNNNNNNNNNNNNNNN<cr>
PUNTO DECIMALE DECIMAL POINT $DPII?<cr> $IIN<cr>