Baroness LM551B, Руководство по эксплуатации для владельца

Страница: 51 / 172

Adjustment of Reel Rotation Control
Valves
The reel rotation control valves adjust the
rotation speeds of the reel cutters (cutting
cylinders).
Adjust according to the operating conditions.
A label listing dial settings for corresponding
reel rotation speeds is attached.
Adjust the reel rotation control valve to the
setting for the reel rotation speed listed on the
reel rotation indicating decal.
"TURNS" means the rotation number of the
dial's counterclockwise rotation started from
the state where the dial is fully tightened
clockwise.
"POS" means the dial decal number pointed by
the indicating screw.
Note:
The factory default reel rotation speed is set to
1,450 rpm.
96fzvf-005
Adjustment of Reel Rotation Control Valves_001
Stop the engine.
Open the underseat cover.
Use the specialized wrench (accessory) to
loosen the lock nut for the dial.
Note:
Raise the lock nut to a position where it will
not interfere when the dial is turned.
6 5
4
3
2
1
8
7
1
2
3
96fzvf-002
Adjustment of Reel Rotation Control Valves_002
1.
2.
3.
1 Dial
2 Lock nut
3 Indicating screw
Important
In order to maintain quality mowing, the reel
rotation speed must be the same for all mower
units.
Turn the dial to set it to the appropriate
position.
Set the two dials to the same position.
5
1 2
3 4
96fzvf-003
Adjustment of Reel Rotation Control Valves_003
1 Dial (mower units #1, #4 and #5)
2 Dial (mower units #2 and #3)
3 Lock nut
4 Indicating screw
5 Reel rotation indicating decal
Tighten the lock nut for the dial.
If the dial rotation number is unknown, follow
the steps below to adjust the dial.
Stop the engine.
Open the underseat cover.
Use the specialized wrench (accessory) to
loosen the lock nut for the dial.
1
3
2
96fzvf-004
Adjustment of Reel Rotation Control Valves_004
4.
5.
1.
2.
3.
Handling Instructions
LM551B
Handling Instructions
Page 4-21
Adjustment before Work