Baroness LM551B, Руководство по эксплуатации для владельца

Страница: 42 / 172

Engine Oil
Inspection of Engine Oil
Important
Securely tighten the oil level gauge and oil
filler cap.
Check the oil level 10 to 20 minutes after
stopping the engine.
Position the machine so that the engine is
level, and then fully insert the oil level
gauge to check the oil level.
1
bgmiun-032
Inspection of Engine Oil_001
1 Oil level gauge
The appropriate oil level should be between
the upper and lower limit lines on the
gauge.
2 3
1
rnr453-004
Inspection of Engine Oil_002
1 Oil level gauge
2 Upper limit
3 Lower limit
Supply of Engine Oil
Important
Do not supply too much engine oil. Otherwise,
the engine may be damaged.
1.
2.
3.
Important
Do not mix different types of engine oil.
Important
Be sure to use engine oil that is classified as
JASO standard:DH-2 or API Service Grade:
CJ-4, with an SAE Viscosity that is
appropriate for the operating environment
(ambient temperature).
Important
Securely tighten the oil level gauge and oil
filler cap.
Engine oil is supplied through the oil filler
cap.
Remove the oil filler cap, and then supply
new engine oil until the oil reaches a level
in between the upper and lower limit lines
on the oil level gauge.
Securely install the oil filler cap.
1
kx9tif-013
Supply of Engine Oil_001
1 Oil filler cap
It will take a while for the supplied engine oil
to descend into the oil pan.
Check the oil level again 10 to 20 minutes
after replenishment.
1.
2.
3.
LM551B
Handling Instructions
Page 4-12
Daily Check List