Baroness LM551B, Руководство по эксплуатации для владельца

Страница: 154 / 172

Important
Since mower units #2 and #3 are connected,
slide them at the same time.
Follow the steps below to slide the mower
units.
When moving to the front position:
Loosen bolt A of mower unit #3.
Remove bolts B of mower unit #3.
3 2 1
enwg3v-002
Adjustment of Positions of Mower Units #2 and #3_002
1 Frame
2 Bolt A
3 Bolt B
In the same way, loosen bolt A and
remove bolts B of mower unit #2.
Slide mower units #2 and #3 from the
rear position to the front position.
1
enwg3v-003
Adjustment of Positions of Mower Units #2 and #3_003
1 Mower unit
Install bolts B of mower unit #3.
In the same way, install bolts B of
mower unit #2.
Tighten bolt A and bolts B on both
sides.
6.
･
[1]
[2]
[3]
[4]
[5]
[6]
[7]
When moving to the rear position:
Loosen bolt A of mower unit #3.
Remove bolts B of mower unit #3.
3 2 1
enwg3v-004
Adjustment of Positions of Mower Units #2 and #3_004
1 Frame
2 Bolt A
3 Bolt B
In the same way, loosen bolt A and
remove bolts B of mower unit #2.
Slide mower units #2 and #3 from the
front position to the rear position.
1
enwg3v-005
Adjustment of Positions of Mower Units #2 and #3_005
1 Mower unit
Install bolts B of mower unit #3.
In the same way, install bolts B of
mower unit #2.
Tighten bolt A and bolts B on both
sides.
Adjust the mower stoppers of mower units
#2 and #3.
"Adjustment of Mower Stoppers for Mower
Unit #2 and #3" (Page 5-41)
Re-secure the mower unit up/down cylinder
hoses with clamps.
･
[1]
[2]
[3]
[4]
[5]
[6]
[7]
7.
8.
LM551B
Maintenance
Page 5-40
Maintenance Work