Baroness GM1700, Руководство по эксплуатации для владельца

Страница: 45 / 87

Important
Quickly returning the ignition key from the
"START" position to the "ON" position may
result in damage to the machine.
After the thermo-start lamp turns off,
immediately set the ignition key to the
"START" position.
When the starter starts rotating and the
engine starts, return the ignition key to the
"ON" position slowly.
Make sure that the charge lamp and engine
oil pressure lamp turn off.
If they do not turn off, stop the engine and
inspect the machine.
Engage the throttle lever to the "Low
speed" position, and then warm up the
engine for 1-2 minutes.
Gradually move the throttle lever to the
"High speed" position.
Procedure to Stop Engine
Set the traveling pedal to the neutral
position.
Depress the brake pedal, and then apply
the parking brake lever.
Set the knife rotation lever to the "Stop"
position.
Shift the throttle lever to the "Low speed"
position, and then idle the machine for 1-2
minutes.
Switch the ignition key to the "OFF"
position.
Make sure that the engine has stopped.
Remove the ignition key.
Leave the driver's seat.
Close the fuel cock.
Safety Mechanisms
This machine features a safety device for
starting/stopping the engine.
As for starting the engine, the safety device
prevents the engine from starting unless it
meets each of the following four conditions.
An operator is sitting on the seat.
The parking brake is applied.
The knife rotation lever is set to the "Stop"
position.
9.
10.
11.
12.
13.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
･
･
･
The traveling pedal is set to the neutral
position.
The safety device will be activated and will
stop the engine under any of the following
conditions:
The operator leaves the seat without
applying the parking brake.
The operator leaves the seat while the
knife is rotating.
The traveling pedal is operated while the
parking brake is applied and the operator
is away from the seat.
Warning Mechanisms
This machine features a warning mechanism
for overheating.
If water temperature inside the engine
exceeds 105 °C (221 °F), a buzzer will
sound. (intermittent tone)
Operation Method
Cautions for when You Leave The
Machine
Caution
If the brakes are not sufficiently effective, use
the wheel stoppers to secure the machine.
Caution
Never park the machine on a slope.
Park the machine on level ground.
Apply the parking brake.
Stop the engine.
Remove the ignition key.
Leave the machine.
Positions of Operation Decals
6
5
1
2
4
3
6n6oux-016
Positions of Operation Decals_001
･
2.
･
･
･
1.
1.
2.
3.
4.
5.
Handling Instructions
GM1700
Handling Instructions
Page 4-17
Operation Method