Baroness GM1700, Руководство по эксплуатации для владельца

Страница: 35 / 87

Supply of Battery Fluid
Danger Danger
Be careful not to let your skin, eyes or clothes,
etc., come into contact with the battery fluid or
accidentally swallow the fluid.
Should your skin or clothes come into contact
with the battery fluid, immediately wash them
away with water.
Danger Danger
When you supply battery fluid, wear protective
garments and safety glasses, etc.
Caution
Implement after the engine and muffler etc.
have well cooled down.
Otherwise you may get burned.
If the battery fluid level is lower than
halfway between the UPPER LEVEL
(maximum) line and LOWER LEVEL
(minimum) line, add purified water up to the
UPPER LEVEL (maximum) line.
U P P E R L E V E L
L O W E R L E V E L
1
2
48yhlu-006
Supply of Battery Fluid_001
1 UPPER LEVEL
2 LOWER LEVEL
Electrical Wiring
Inspection of Electrical Wiring
Important
Electrical short circuit will cause fire, electrical
leakage and malfunction of electrical
equipments.
1.
Inspect electrical wiring for poor terminal
connections, damaged wiring or terminals,
loose connections, weather-related
deterioration and chemical-related
deterioration.
If necessary, repair before operating the
machine.
Tire
Inspection of Tires
Check the pneumatic pressure of the tires.
Make sure that there are no cracks,
damage or abnormal wear.
Tire size Pneumatic pressure
Front
whee
l
21 x 11.00 - 10 140 kPa (1.4 kgf/cm
2
)
Rear
whee
l
21 x 11.00 - 10 140 kPa (1.4 kgf/cm
2
)
Brake
Inspection of Brake Pedal
When depressing the brake pedal fully,
make sure that there is appropriate
clearance between the floorboard and the
pedal or pedal reserve distance.
When depressing the brake pedal fully,
make sure that the pedal reaction is not
spongy and that there is no noise.
When depressing the brake pedal during
traveling, make sure that the machine stops
smoothly and the braking is sufficiently
effective.
Inspection of Parking Brake
Make sure that the parking brake is applied
after depressing the brake pedal and
pulling the parking brake lever.
Make sure that the parking brake is not
applied even slightly after depressing the
brake pedal to release the parking brake
lever.
Inspection of Knife Brake
Make sure that the rotary knife stops rotating
within 7 seconds after the knife rotation lever
is set from the "Rotation" position to the
"Stop" position.
1.
2.
1.
2.
3.
1.
2.
Handling Instructions
GM1700
Handling Instructions
Page 4-7
Inspections