Barnstead|Thermolyne EASYpure D7421, Инструкция по установке, эксплуатации и сервисному обслуживанию

Страница: 21 / 44

21
4. Turn the unit on by depressing the
ON/OFF switch on the power entry mod-
ule in the rear of the EASYpure RO (see
Figure 8, page 19).
5. Allow the unit to operate for approximately
one hour, sending all water produced to
drain.
6. Turn unit power off. Reconnect the prod-
uct water tubing to the other EASYpure
unit. Reconnect the product water tubing
to the accessory 30 Liter Reservoir.
Reconnect the pump interlock cord to the
other EASYpure unit.
Set "Replace Prefilter" Indicator
The extruded carbon prefilter both filters particu-
lates and absorbs free chlorine out of your feedwa-
ter supply. After a certain point, the extruded car-
bon will become saturated with chlorine and will
cease to effectively protect your membrane from
the damaging effects of chlorine. The "Replace
Prefilter" Indicator alerts you when the prefilter
requires changing.
I
NSTALLATION
Switch Panel
Figure 9 Switch Panel Location
Membrane Reset
Membrane
Bypass
Tubing
Prefilter Reset