26
2.
With the top plenum properly secured to the chamber ceiling, a
space on each side of the plenum is created into which the top of
each of the shelf support side panels will fit. Tilt a support side panel
at an angle and move it into the chamber. Carefully slide the panel
over the studs protruding from one side of the chamber wall and lock
it into place. Repeat this procedure on the other side to install the
second side panel.
REAR COVER PANEL, HEAD-ON VIEW:
TOP PLENUM
REAR PANEL
KEYWAY STUDS
KEYHOLE SLOTS
(FIT OVER AND ONTO TOP PLENUM
KEYWAY STUDS)
3.
Move the rear cover panel into the chamber and place its keyhole slots over
and onto the top plenum keyway studs, moving the back wall slots down
and locking them onto the keyway studs.
INSTALLATION:
(Con’t)
PORT STOPPER:
REAR COVER PANEL
PORT STOPPER INSTALLED
Insert the inner, narrower edge of the port stopper into the port opening located on
the rear chamber wall. Make sure the outer, wider edge is flush with the rear
interior chamber wall.
INSIDE REAR CHAMBER WALL, SIDE VIEW
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
